Adjusting The Quality Of Your Faxes; Setting The Resolution - Canon MultiPASS C635 User Manual

The MultiPASS begins the operation approximately ten seconds after you
press the last button (five seconds if you press only one button) even if
you do not press
The MultiPASS dials the destinations in numerical order starting with the
coded dial numbers, then the one-touch numbers, and finally the regular-
dial number (regardless of the order in which you entered the numbers).
To cancel a transmission, press
All subsequent transmissions in the sequence are cancelled. (You may
need to open the operator panel to remove the document; see page 8-3.)
N
If the memory becomes full while scanning your document, the LCD
displays
to remove the document; see page 8-3.) You can split the document into
two or three different jobs, or you can try sending the document to one
location at a time.

Adjusting the Quality of Your Faxes

Canon's Ultra High Quality (UHQ™) imaging technology enables you
to send faxes that have a print quality very close to that of the original
document. The MultiPASS also allows you to adjust the resolution and
contrast it uses in sending faxes to best suit your particular document.

Setting the Resolution

Resolution is a measure of the fineness or clarity of a printout and is
usually expressed in horizontal and vertical dots per inch (dpi). Low
resolutions may cause text and graphics to have a jagged appearance,
while higher resolutions provide smoother curves and lines, crisp text
and graphics, and a better match to traditional typeface designs.
Chapter 4
START/COPY
. (You may need to open the operator panel
MEMORY FULL
Sending Faxes With the MultiPASS C635
.
during the dialing or transmission.
STOP
4-13