Table of Contents
Advertisement
2
Open the
printer cover.
C
Do not try to move the cartridge holder manually; this may damage the
unit. If the cartridge holder does not move and the unit beeps several
times, unplug the MultiPASS and let it cool for several minutes. (The
device has an automatic protection mode that prevents it from
overheating.) After allowing it to cool, plug the unit in again and press
the
CARTRIDGE
the unit.
Hold the BJ cartridge on the sides only. Do not touch the silver plate on
the bottom of the BJ cartridge or the silver metal or circuit area on the
side. The metal area may become hot during printing.
7-12
Maintaining the MultiPASS C635
❍ Grasp both sides and lift it up.
button to move the cartridge holder to the center of
DO NOT TOUCH THE
RIBBON CABLE
DO NOT TOUCH THE
GUIDE RAIL
DO NOT TOUCH THE
ROUND SHAFT
Chapter 7
Advertisement
Table of Contents
Troubleshooting
