Appendix; Uninstallation Procedure; Uninstalling The Mf Toolbox (Usb Connection Only); Uninstalling The Mf Drivers - Canon imageCLASS MF6595 Starter Manual

Appendix

Uninstallation Procedure

You can uninstall the installed software and drivers if they are no longer needed.
Before uninstallation, make sure of the following:
You have the installation software available for installation.
●
No application is running on your computer.
●
–
For uninstallation in Windows 2000/XP/Server 2003/Vista, you must be the user with administrative privileges.
–
For uninstallation, first uninstall the MF Toolbox, and then the MF drivers.
–
If you want to remove the manuals installed from [Easy Installation], you can manually uninstall them by selecting the [Additional
Software Programs] on the MF6500 Series CD-ROM Setup screen and click the [Uninstall] button for Manual Uninstaller.
Uninstalling the MF Toolbox
(USB Connection Only)
1
Click [start] on the Windows task bar → [(All)
Programs] → [Canon] → [MF Toolbox 4.9] →
[Toolbox Uninstall].
2
Follow the on-screen instructions.
When the Repair or Remove program selection screen is
displayed, check [Remove], then click [Next >].
If asked to confirm removal of an application etc., click
[Remove].
Restart your computer if asked to do so.
3
Click [Exit].

Uninstalling the MF Drivers

1
Click [start] on the Windows task bar → [(All)
Programs] → [Canon] → [MF6500 Series] →
[Uninstall Drivers].
The [MF Drivers Uninstaller] dialog box appears.
2
Click [Delete].
3
Click [Yes].
Uninstallation proceeds automatically and next dialog box
appears.
4
Click [Exit].
Restart your computer if asked to do so.
29