Set Up The Paper Cassette And Load Paper - Canon imageCLASS MF6595 Starter Manual

Set Up the Paper Cassette and Load Paper

1
Pull out the paper cassette until it stops. If you
use LTR size, go to step 4. If you use other sizes,
go to step 2.
2
Incline the rear paper end guide until it is
unlocked, then remove it from the paper
cassette.
By default, the guide is set to LTR.
3
Attach the guide to the slots of the desired
paper size.
4
Even the edges of the paper stack.
5
Load the paper stack print side up.
Make sure the back edge of the paper stack touches the rear
paper end guide (A), the paper stack does not exceed the
load limit mark (B), and the load is under the small fins (C)
on the paper guides.
6
Gently insert the paper cassette as far as it will
go.
Be careful not to get your fingers caught.
–
You can load the paper into the additional paper cassette
(standard for MF6595cx and optional for MF6595). For
attaching the additional paper cassette, see the
instruction sheet that comes with the machine.
–
For loading paper in the multi-purpose tray, see
Chapter 2, "Document and Paper, " in the Basic Guide.
Set Up the Machine
7