Assa Abloy Yale Assure Lock YRC256-ZW3 Installation And Programming Instructions page 33

Feature Programming Through Menu Mode
Using Master PIN code*
1. Touch screen with back of hand or palm to activate.
2. Enter 4-8 digit master PIN code* followed by
Lock Response: "Menu mode, enter number, press
3. Enter digit corresponding to the function to be performed followed by the
*The Master PIN code must be registered prior to any other programming of the lock.
Note: After Master PIN code is entered, lock will automatically hand itself. For best results, lock should be installed
on door during this process. If this process was done and lock was not installed on door, review the Re-Handing
instructions listed in Hardware Troubleshooting.
M
1 2
Master PIN Code Setting
User Codes
Advanced Lock Settings
Volume Setting
Language Setting Mode
Lockout Mode
**Network Module Setting
***Set-up Digital Keys
key.
key to continue."
3
1~12: with Bluetooth
M
1~25: without network module or with iM1 network module
1~250: with Z-Wave Plus or Zigbee network module
U
Enter
U
Delete
Automatic Re-lock
Inside Indicator Light
One Touch Locking
Privacy Button Setting
Handing the Lock
High
Low
Silent
English
Spanish
French
Enable
Disable
Join the Network
Exit the Network
33
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
key. Follow the voice commands.
Continue
Complete
Continue
Complete
Disable
30 sec
60 sec
2 min
3 min
Continue
Enable
Disable
Enable
Disable
Enable
Disable
Preforms automatic
handing of the lock
Complete
Default settings
in bold.
**This function appears only with
network module installed.
***This function appears only with
P/N C620 installed.