Table of Contents
Advertisement
INTRODUCTION – GIGA-MINIMC (-TX & -RX)
Part Numbers: 856-10730-RX, 856-10730-TX
The above part numbers must be installed in pairs. As a pair, the units provide
secure data to be passed in one direction only.
The Giga-MiniMc provides a single conversion between 10/100/1000 Base-T
twisted-pair and 1000 Base-SX/FX fiber. This device Auto Negotiates speed and
duplex on the copper port and the fiber 100Mbps, FDX. The media converter
supports jumbo frames up to 1536 MTU.
The Giga-MiniMc is a fixed fiber transceiver model and includes one
10/100/1000Mbps RJ-45 connector and one 1000Mbps SC fiber connector that
can support multi-mode fiber.
NOTE: Some options require items that are sold separately, available from B+B SmartWorx.
INSTALLATION
The Giga-MiniMc RX/TX installs virtually anywhere as a standalone device in
locations with extremely limited space. Installation options include:
•
Velcro strips
•
DIN rail mounting with DIN rail clips
•
Wall mount bracket
•
PowerTray/18 for high density applications
HARDW ARE MOUNTING
The Giga-MiniMc can be mounted on DIN rail or using wall mount brackets:
DIN rail clips (part number 806-39105) and wall mount brackets (part number
895-39229) are available for purchase from B+B SmartWorx.
Giga-MiniMc
4
(-TX & -RX)
Advertisement
Table of Contents
