Table of Contents
Advertisement
Specifications
Item
Dimensions of
Approx. 480 mm (W) × 250 mm (D) × 300
machine
mm (H)
(Approx. 18-7/8 inches (W) × 9-7/8 inches
(D) × 11-7/8 inches (H))
Weight of machine
Approx. 8.7 kg (Approx. 20 lb)
Dimensions of
Approx. 693 mm (W) × 421 mm (D)× 300
machine with
mm (H)
embroidery unit
(Approx. 27-3/8 inches (W) × 16-5/8
attached
inches (D) × 11-7/8 inches (H))
Weight of machine
Approx. 12.2 kg (Approx. 27 lb)
with embroidery unit
attached
Sewing speed
70 to 850 stitches per minute
* Please be aware that some specifications may change
without notice.
Specification
Updating Your Machine's Software
The machine's software can be updated using USB flash
drive.
When an update program is available on our website at
www.babylock.com , please download the file(s)
following the instructions on the website and steps listed
below.
Note
• When using USB flash drive to update the
software, check that no data other than the update
file is saved on the USB flash drive being used
before starting to update.
Memo
• When the machine's software is updated, saved
embroidery patterns will not be erased.
When using the wireless function, the update mark is
displayed on the wireless LAN key.
: Updated software is available on our website. Update
the software.
: No updated software is available.
Version information can be checked from the settings
screen. (page 15)
a
Turn on the machine while pressing and holding
(Presser foot lifter button).
The following screen appears.
b
Insert the USB flash drive into the USB port on the
machine.
Note
• Save only the update file on the USB media.
c
Press
.
• Do not turn off the machine during the update.
When updating is finished, the completion message
appears.
Remove the USB flash drive, and turn the machine off
d
and on again.
Specifications
3
59
Advertisement
Table of Contents
