Editing Patterns (Embroidery Settings Screen); Aligning The Pattern And The Needle Position - Tacony Baby Lock Flare Instruction And Reference Manual

Editing Patterns (Embroidery Settings Screen)

Editing Patterns (Embroidery Settings
Screen)
When is pressed in the editing screen, the embroidery
settings screen appears. After editing the pattern, press
to continue to the embroidering screen.
■ Embroidery settings screen
7 6 5
Display
No.
Key Name
1
Press these keys to move the pattern in
the direction shown by the arrow. (Press
the center key to return the pattern to
Move key
the center of the embroidery area.)
(page 46)
2
Press this key to rotate the entire
pattern.
Rotate key
Press
original position.
3
Press this key to rearrange the stitching
sequence for combined patterns.
Color sorting key
4
Press this key to enter the embroidery
screen.
Embroidery key
5
Press this key to save patterns to the
machine's memory or USB flash drive.
Memory key
Patterns can also be transferred to a
computer via wireless network
connection. (page 49)
6
Press this key to check the position of
the pattern. (page 35)
Trial key
7
Press this key to move the needle start
position to align the needle with the
Starting point key
pattern position. (page 46)
46
1
2
3
4
Explanation
to return the pattern to its

Aligning the pattern and the needle position

Example: Aligning the lower left side of a pattern and the
needle position
Memo
• It is recommended to use the optional embroidery
foot with LED pointer "U+" for this procedure.
a Mark the embroidery start position on the fabric, as
shown.
b Press .
Press and press
c
1
1 Start position
 The needle position moves to the bottom left corner
of the pattern (the embroidery frame moves so that
the needle is positioned correctly).
Use to align the needle and the mark on the
d
fabric, press and begin embroidering the pattern.
.