Table of Contents
Advertisement
Embroidering
Memo
• If [Embroidery Frame Identification View] in the
settings screen is set to [ON], the pattern can be
edited in the screen as if that embroidery frame is
attached.
a
1 The embroidering area for the selected frame is
displayed.
2 Patterns that will not fit in the selected frame
appear shaded and cannot be selected.
• There are three embroidering area sizes for
embroidery frame (small).
When [Embroidery Frame Identification View] is set
to [ON] for embroidery frame (small), the area for
arranging patterns can more easily be seen. The
area outside of the embroidering area will have a
different background color.
1
2
1 2 cm × 6 cm (approx.1 inch (H) × 2-1/2 inches
(W))
2 3 cm × 5 cm (approx.1-1/8 inches (H) × 2 inches
(W))
3 4 cm × 3 cm (approx.1-1/2 inches (H) × 1-1/8
inches (W))
4 Patterns are arranged outside of the
embroidering area.
34
b
3
4
■ Selecting character patterns
a
Press
.
b
Press the key of the font you want to embroider.
c
Press a tab to display the desired selection screen, and
then type in the text.
a
b
• To enter a space, press
• After selecting a character if you would like to
change the character size press
changes each time you press the key, from large to
medium to small. After the character size is changed,
all characters on the same line will have the new
character size.
• If you make a mistake, press
• If the pattern is too small to see clearly, you can use
the
key to check it.
• To add multiple lines, press
• When the Japanese font is selected, the text can be
switched between being written vertically and
horizontally by pressing
d
Press
.
• For details on editing the pattern, refer to "Editing
Patterns (Pattern Editing Screen)" on page 44.
■ Selecting frame patterns
a
Press
.
b
Press the key of the frame shape you want to
embroidery.
c
Press the key of the frame pattern you want to
embroidery.
1 Current line number
2 Tab
.
. The size
to erase the mistake.
.
.
Advertisement
Table of Contents
