Table of Contents
Advertisement
Embroidering linked characters
Follow the procedure described below to embroider linked
characters in a single row when the entire pattern extends
beyond the embroidery frame.
Example: Linking "DEF" to the characters "ABC" using
embroidery frame 10 cm × 10 cm (4 inches × 4 inches)
(sold separately with some models)
Memo
• It is recommended to use the optional embroidery
foot with LED pointer "U+" for this procedure.
a
Select the character patterns for "ABC", and then press
and
.
b
Press
.
c
Press
, and then press
The needle is positioned in the lower-left corner of
the pattern. The embroidery frame moves so that the
needle is positioned correctly.
d
Press
.
e
Lower the embroidery foot and then press the "Start/
Stop" button to begin embroidering.
f
After the characters are embroidered, and the threads
are cut, remove the embroidery frame, and then press
for [Finished embroidering].
a
g
Reposition the fabric in embroidery frame so that the
right side of the letter "C" will be partially inside the
embroidery frame; being careful so letters remain
straight and level. Then reattach frame again so that
the remaining characters ("DEF") can be embroidered.
h
i
j
k
l
.
m
n
1 End of the
embroidering
Editing Patterns (Embroidery Settings Screen)
Press
to cancel the current character patterns.
Select the character patterns for "DEF", and then press
and
.
Press
.
Press
, and then press
The needle is positioned in the lower-left corner of
the pattern. The embroidery frame moves so that the
needle is positioned correctly.
Use
to align the needle with the end of the
embroidering for the previous pattern.
Press
.
Lower the embroidery foot and press the "Start/Stop"
button to begin embroidering the remaining character
patterns.
.
2
47
Advertisement
Table of Contents
