Embroidery Foot Auto Down - Tacony Baby Lock Flare Instruction And Reference Manual

Embroidering
f Press .
g To return to the area in the pattern where you stopped
embroidering, follow steps
section.
■ If the thread breaks during embroidering
a Press the "Start/Stop" button to stop the machine.
b If the upper thread is broken, redo the upper
threading. If the bobbin thread is broken, press
and follow the directions in steps
the previous section to reset the bobbin.
c Press .
Press , , or
d
correct number of stitches before the area where the
thread broke.
Memo
• If you cannot move back to the area where the
thread broke, press
move to the beginning position of that color, then
use , or
before where the thread broke.
e Press to return to the original screen.
f Press (Presser foot lifter button) to lower the
presser foot, and press the "Start/Stop" button to
continue embroidering.
38
c f
through in the next
a f
through from
to move the needle back the
to select the color and
to move ahead to slightly
■ Resuming embroidery after turning off the
power
The current color and stitch number are saved when
embroidery is stopped. The next time the machine is
turned on, you have the option to continue or delete the
pattern.

Embroidery Foot Auto Down

You can choose a setting to automatically lower the
embroidery foot at the beginning of embroidering.
a Press to display the settings screen, and then
display page 3 by pressing
Set [Embroidery Foot Auto Down] to [ON].
b
1
1 When set to [ON], pressing the "Start/Stop" button when
the presser foot is raised automatically lowers the
presser foot before starting embroidering.
/ .