Table of Contents
Advertisement
■ Wireless LAN settings
1
2
3
4
5
7
8
9
0
1 Enable/disable the wireless LAN function. (page 16).
2 Display the connected SSID. (page 16)
3 Set the machine to connect wireless LAN function. (page
16)
4 Check the wireless LAN status.
5 Display the machine name of wireless LAN function.
6 Change [Machine name].
7 Display a menu to perform other settings or reset the
connection settings of the wireless LAN settings. (page
18)
8 Check the latest version of the software.
The version will display in [Latest Version Available].
9 Display the latest version of the software.
0 Displays a message if [New update on server] is
available for this machine.
If [New update on server] appears, update the machine.
(page 59)
Adjusting input sensitivity for operation keys
You can adjust the sensitivity of the operation keys to 5 levels.
Display the settings screen to set desired level.
a
Press
Display page 6 by pressing
b
Press [Start].
c
6
d
Adjust the [Input Sensitivity] by pressing
• The higher the setting, the more sensitive the keys
• We recommend selecting the highest setting if an
• While adjusting the input sensitivity, press
e
Press
■ If the machine does not respond when an
operation key is pressed
Turn machine off, then hold down
button) and turn on the machine to reset [Input
Sensitivity]. Display the settings screen, and then adjust
the [Input Sensitivity] again.
to display the settings screen.
/
will be. The default setting is [3].
electrostatic touch pen is being used.
check whether the key responds.
When the key responds, the setting value indicating
the sensitivity blinks.
to return to previous screen.
LCD Operation
1
.
/
.
to
(Thread cutter
15
Advertisement
Table of Contents
