Table of Contents
Advertisement
Winding/Installing the Bobbin
■ Setting the wireless LAN connection from the
[Others] menu
The [Others] menu on page 9 of the settings screen
contains the following items.
1
2
3
4
1 TCP/IP settings can be manually entered.
2 Shows the MAC address.
3 Use when proxy settings are required.
4 Resets the wireless LAN connection settings.
18
Winding/Installing the Bobbin
CAUTION
• Use the plastic bobbin that comes with this
machine or bobbins of the same type. The
bobbin's height is 11.5 mm (approx. 7/16
inch). X52800-120 is Class 15 type bobbin.
Winding the bobbin
This section describes how to wind thread onto a bobbin.
Memo
• When winding bobbin for embroidery, be sure to
use the recommended bobbin thread for this
machine.
a
Open the top cover.
b
Place the bobbin on the bobbin winder shaft so that the
notch in the bobbin aligns with the spring on the shaft,
and then slide the bobbin winder shaft to the right until
it snaps into place.
1
2
• The "Start/Stop" button lights up in orange.
1 Notch
2 Bobbin winder
shaft spring
Advertisement
Table of Contents
