Ps-9000 Setup Method 1; Install This Unit And The Utility." -Using The Tcp/Ip Protocol - Brother PS-9000 User Manual

PS-9000 Setup Method 1

The setup wizard is very easy.
Caution
●
Before specifying settings, be sure to install the P-touch printer driver. (From the dialog box that
appears when the CD-ROM included with the PS-9000 is inserted into the drive, click
[P-touch Driver], and then install the network driver for your P-touch.
●
Before starting the setup, make sure to quit all application programs that are running.
"Install this unit and the utility."
-Using the TCP/IP protocol
This method sets up the PS-9000 and the printing software. Choose this setup mode when you are
using the PS-9000 for the first time and the product is still set to its factory default settings.
In the main menu dialog box, click
1
[Setup]. The welcome message shown
below appears. Click [Next].
Read the Software License Agreement,
2
and then click [Yes] if you agree.
Select "Installs this unit and the utility.",
3
and then click [Next].
15