How To Set Up The Ps-9000 - Brother PS-9000 User Manual

How to Set Up the PS-9000

Caution
●
When setting up the PS-9000 on an operating system that has administrator privileges (such as,
®
Microsoft Windows NT
be sure to log in with a user account that has administrator privileges.
There are two setup methods available with the Brother PS-9000 Utility.
"Installs this unit and the utility."
1
With this method, the PS-9000 print server settings are specified and the software for printing on
a network is installed onto the computer. Select this method if the PS-9000 is being used for the
first time after it was purchased or after its settings were reset to the factory default settings.
"Installs the utility."
2
With this method, only the software for printing on a network is installed onto computers. Select
this setup method if the PS-9000 is already set up and the software is being installed onto the
second or more computer.
Caution
●
Install the printing software onto all computers that will use the P-touch connected to the PS-9000.
Software License
●
Use the software according to the license agreement that appears during installation.
●
Install the software onto multiple computers at a single location and use it to print from the
P-touch connected to the PS-9000.
14
®
4.0, Microsoft Windows
®
®
2000 Pro or Microsoft
® ®
Windows XP),