Table of Contents
Advertisement
*For details on the LEDs, refer to "Parts and Functions" in chapter 1, "About PS-9000".
■ 2 LINK LEDs (green)
Lights when a proper LAN connection is established.
With a 100BASE-TX–compatible machine, check which LED is lit to determine if the connected
LAN interface is 10BASE-T or 100BASE-TX.
■ STATUS LED (orange)
Flashes during data transfer. During data transfer, this LED flashes at irregular intervals.
If the LEDs indicate that operations are not being performed correctly, connected equipment or cables
connecting the PS-9000 to the computer running the setup utility are not set up correctly. (Check that
the indicators for the power supply and connection on the hub or router indicate that they are
operating correctly.) If they are not operating correctly, replace the power supply cables, connection
cables or connected equipment, and then try performing the operation again.
31
Advertisement
Table of Contents
