Mounting And Detaching A Lens.18 - Canon EOS 3000N Instructions Manual

Hide thumbs Also See for EOS 3000N:
Table of Contents

Advertisement

Mounting and Detaching a Lens
Mounting a Lens
Remove the caps.
• Remove the rear lens cap and the
camera body cap.
Mount the lens.
• Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.
On the lens, set the focus mode
switch to <AF>.
• If the focus mode switch is set to
<MF>
(or
<M>
on older lenses),
autofocus will not operate and <(ZQ>
will be displayed on the LCD panel.
Remove the front lens cap.
Canon
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
• When the red dot on the lens Is at the
top, remove the lens.
Keep the removed caps where you will not lose them
An EF-S lens cannot be attached to the camera.
"AP stands for Autofocus.
"MP (or "M") stands for Manual Focus.
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos 3000n dateEos rebel xsnEos rebel xsn dateEos rebel giiEos 66Eos 66 date

Table of Contents