Image Protection - Canon EOS 1D Mark II N Instruction Manual

J

Image Protection

Protecting a Single Image
This prevents the image from being erased accidentally.
Since the <
sound recording (p.129), if you press the button too long (2 sec.), sound
recording will start instead and image protection will not be set. To apply
image protection, press the <
Note that formatting the memory card will also erase any protected
images.
The image can be protected regardless of the display format.
Protected images cannot be erased with the camera's Erase function. To
erase protected images, first cancel the image protection.
If you use "Erase all" (p.131, 132) when there are protected images, all
images except the protected ones will be erased. This is convenient
when you want to erase unnecessary images all at once.
1
Display the image to be
protected.
2
Protect the image.
H
> button has dual functions for image protection and
H
H
Press the <
J
The < > icon will then appear to
indicate that the image is protected.
To cancel the image protection, press
H
the < > button again. The <
icon will disappear.
You can also protect the image right
after capture by pressing the <
button during the image review.
> button and let it go immediately.
> button.
J
H
>
>
127