Takeuchi TB215R Workshop Manual page 221

9. Tighten the socket bolts.
• Apply Loctite #242 to the socket bolt.
Bolt: 34.3 N·m (29.3 ft.-lb)
10. Insert the drive gear.
11. Fit the O-rings (large and small) to the flange mount-
ing, and attach them to the gerolor.
• When installing, be sure to align the flange mount-
ing with the gerolor drain hole.
12. Insert the valve drive into the gerolor.
13. Fit the O-rings (large and small) to the valve plate,
and insert them into the gerolor.
• When inserting, be sure to align the valve plate
with the gerolor drain hole.
SLEW MOTOR
DISASSEMBLY AND ASSEMBLY
9
4
SLEW MOTOR
4N0AX00