Takeuchi TB215R Workshop Manual page 210

15. Attach the cover to the housing.
• Align the notch on the housing with the drain plug
hole.
16. Attach the snap ring to secure the cover in place.
• Set a flat head screwdriver against the edge of the
snap ring to hammer it in around its circumfer-
ence.
17. Attach the O-ring to the plug, and insert it into the
cover.
Plug: 46 to 51 N·m (33.9 to 37.6 ft.-lb)
TRAVEL MOTOR
DISASSEMBLY AND ASSEMBLY
14
4
TRAVEL MOTOR
4M0AX00