Takeuchi TB215R Workshop Manual page 123

Lever stand
Construction
Pilot valve (Left)
1 Adjusting the limit switch: When the limit switch is in the ON posi-
tion, the tip of the switch should be visible from the boot.
Apply rubber grease #9106 (for natural rubber).
Apply grease to the inside of the bushing during assembly.
OPERATING DEVICE
DISASSEMBLY AND ASSEMBLY
1. Control box L
2. Bracket
3. Plate
4. Bracket
5. Plate
4
OPERATING DEVICE
6. Lever
7. Shaft
8. Pilot valve (Left)
9. Gas spring
10. Limit switch
4F0AX00
4