Takeuchi TB215R Workshop Manual page 186

disassembly
Cylinder assembly
1. Keep the cylinder in a level position by securing the
clevis of the tube in a vise and placing a wooden sup-
port under the other end.
2. Drain the remaining hydraulic oil from the cylinder.
• Move the piston rod slowly to prevent the hydraulic
oil from spurting out.
3. Disengage the anti-rotation lock of the rod cover.
• Since the anti-rotation lock is built into the cylinder
tube, take care not to damage the tube when disen-
gaging the lock.
4. loosen the rod cover.
• Pull out the piston rod approximately 200 mm (7.9
in.) beforehand.
• Cover the piston rod to protect it from dents.
5. Pull out the piston rod assembly from the tube.
• Pull it out straight so as not to damage the sliding
surface.
Piston rod assembly
1. secure the piston rod assembly in a level position.
CylinDers
Disassembly anD assembly
5
4
Cylinders
4LAA07Z
4LAA08Z
4LAA09Z
4LAA10Z
4l0aX00