Takeuchi TB215R Workshop Manual page 208

7. Place the rings, thrust washers, planet gears B1, and
needles on the pins.
• Be sure to attach the ring (20) in the correct direc-
tion. The side with the chamfered internal diame-
ter must be on the motor side.
8. Attach the thrust washer, and secure it in place with
the snap rings.
• Do not spread the snap ring open more than nec-
essary.
• Insert the snap ring with the edge facing the cov-
er.
9. Insert the sun gear S1 into the carrier 2, and secure
it in place with a snap ring.
10. Insert the thrust washers, planet gears B2, needles,
and thrust washers into carrier 2, and secure them in
place with a snap ring.
TRAVEL MOTOR
DISASSEMBLY AND ASSEMBLY
12
4
TRAVEL MOTOR
4M0AX00