FIC PT-2006 Manual page 60

PT-2006 Mainboard Manual
Supervisor/User Password
To enable the Supervisor/User passwords, select the item from the Standard
CMOS Setup. You will be prompted to create your own password. Type your
password up to eight characters and press <<Enter>>. You will be asked to
confirm the password. Type the password again and press <<Enter>>. You may
also press <<Esc>> to abort the selection and not enter a password. To disable
password, press <<Enter>> when you are prompted to enter password. A
message appears, confirming the password is disabled.
Under the BIOS Feature Setup if System is selected under the Security Option
field and the Supervisor Password is enabled, you will be prompted for the
Supervisor Password every time you try to enter the CMOS Setup Utility. If
System is selected and the User Password is enabled, you will be requested to
enter the User Password every time you reboot the system. If Setup is selected
under the Security Option field and the User Password is enabled, you will be
prompted only when you reboot the system.
IDE HDD Auto Detection
The IDE Hard Disk Drive Auto Detection feature automatically configures your
new hard disk. Use it for a quick configuration of new hard drives. This feature
allows you to set the parameters of up to four IDE HDDs. The option with (Y)
are recommended by the system BIOS. You may also keys in your own
parameters instead of setting by the system BIOS. After all settings, press Esc
key to return the main menu. For confirmation, enter the Standard CMOS Setup
feature.
58