Chipset Features Setup - FIC PT-2006 Manual

Chipset Features Setup

Auto Configuration
When set at Enabled, it allows you to configure the features that from the
third one, Fast RAS To CAS Delay, to the eighth one, Refresh RAS#
Assertion. This is for technician use only.
The options are: Enabled (Default), Disabled.
DRAM Timing
Allows you to select the speed of data access to EDO DRAM. This is for
technician use only.
The options are: 60 ns (Default), 70 ns.
Fast RAS To CAS Delay
Allows you to define the delay time that from DRAM RAS# active to CAS#
active. This is for technician use only.
The options are: 3 (Default), 2.
Unit: Clock T.
DRAM Read Burst (EDO/FP)
Allows you to define DRAM read burst timing. This is for technician use
only.
The options are: x222/x333 (Default), x332/x333, x444/x444,
x333/x444.
Award BIOS Setup
47