Table of Contents
Advertisement
Engine-oil sample extraction and
analysis, variant B
1.
With the engine running at operating tem‐
perature, open screw on automatic oil filter
by 1 to 2 rotations.
2.
Drain approx. 2 liters engine oil to flush out
the oil sludge.
3.
Drain approx. 1 liter engine oil into a clean
container.
4.
Close screw.
5.
Using the equipment and chemicals of the
MTU test kit, examine oil for:
• Dispersion capability (spot test);
• Water content;
• Dilution by fuel.
106 | Task Description | MS150054/02E 2012-02
Advertisement
Table of Contents
