Table of Contents
Advertisement
7
Device Registration
Before a device can communicate via The Things Network you need to register it with an application. The ADT1 are
preconfigured on the open-source, decentralized network called
the LoRa Alliance and provide a set of open tools and a global, open network to connect things. This means the ADT1 is
ready to use without any configuration changes.
Nevertheless the ADT1 can be easily reconfigured through the USB interface to other network servers like Actility,
Loriot
etc.
7.1
Integration with the Things Network (TTN)
To use the default Over The Air Activation (OTAA) you will need to register your device with its Device EUI:
1. Access to the TTN portal
https://console.thethingsnetwork.org/If you don't have an application yet, you need to create one. For more
information on how to do this have a look at the network server
2. Open the application to which you wish to add a device and click register device.
o
For Device ID, choose a - for this application - unique ID of lower case, alphanumeric characters and
non-consecutive- and _.
o
For Device EUI, copy-paste the one you retrieved from your device.
If you plan to switch to ABP anyway, click the button have one generated for you.
o
Leave the App Key to be generated.
o
For App EUI, select the generated EUI from the list.
3. Click Register to finish.
You will be redirected to the newly registered device where you can find the generated App Key needed to ac-
tivate the device.
Version 08/2020
https://www.thethingsnetwork.org/.
"The Things
Network". TTN is a contributor member of
An account is free and the entry page is
information.
www.keller-druck.com
Seite 21 von 24
Advertisement
Table of Contents
