Table of Contents
Advertisement
7
Device Registration
Before a device can communicate via The Things Network you need to register it with an application. The ADT1 are
preconfigured on the open-source, decentralized network called
the LoRa Alliance and provide a set of open tools and a global, open network to connect things. This means the ADT1 is
ready to use without any configuration changes.
Nevertheless the ADT1 can be easily reconfigured through the USB interface to other network servers like Actility,
Loriot
etc.
7.1
Integration with the Things Network (TTN)
To use the default Over The Air Activation (OTAA) you will need to register your device with its Device EUI:
1. Access to the TTN portal
https://console.thethingsnetwork.org/If you don't have an application yet, you need to create one. For more
information on how to do this have a look at the network server
2. Open the application to which you wish to add a device and click add end device. Select "KELLER AG für
Druckmesstechnik" as Brand and select the model according our device. Set the Profile parameter of our re-
gion.
o
Chossing a frequency plan. In Europe choose "Europe 863-870 MHz (SF9 for RX2 - recommended)"
o
For Device EUI, copy-paste the one you retrieved from your device.
o
Leave the App Key to be generated.
o
For App EUI, entering the AppEUI from the device.
3. Click Register end device to finish.
Version 05/2021
https://www.thethingsnetwork.org/.
"The Things
Network". TTN is a contributor member of
An account is free and the entry page is
information.
www.keller-druck.com
Seite 22 von 32
Advertisement
Table of Contents
