Maintenance
To clean the display, use lens cleaner and a soft, lint-free cloth.
To clean the case, use a soft cloth that is moist with water or
water and a weak soap.
To prevent damage to the display or the case, do not
use solvents or abrasive materials.
To clean the optical connector, use the procedure given on page
11.
To prevent possible fire, electrical shock, personal
injury, or damage to the meter:
•
Do not open the case. You cannot repair or replace
parts in the case.
•
Use only replacement parts that are approved by Fluke
Networks.
•
If you replace parts that are not specified as
replacement parts, the warranty will not apply to the
product and you can make the product dangerous to
use.
•
Use only service centers that are approved by Fluke
Networks.
If the meter shows ERROR
Speak to a Fluke Networks representative. See page
16.
W
Caution
W
Warning
Note
2
, servicing is necessary.
X
*
Maintenance
15