Advertisement
The FindFiber
power meter to identify fiber connections at patch panels.
The source comes with the following:
•
Two AA alkaline batteries
•
Instruction Sheet
The FindFiber-6 kit comes with the following:
•
Six FindFiber sources
•
Twelve AA alkaline batteries
•
Instruction Sheet
If something is damaged or missing, contact the place of
purchase immediately.
Safety Information
To avoid possible eye damage caused by hazardous
radiation:
•
Never look directly into optical connectors. Some
sources produce invisible radiation that can
permanently damage your eyes.
•
Never turn on the source unless a fiber is
attached to the port.
•
Do not use magnification to view the optical
outputs without proper filtering.
•
Use of controls, adjustments, or procedures not
stated herein might result in hazardous radiation
exposure.
PN 3314833 (English) September 2008
©2008 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
™
source is used with a SimpliFiber
W
Warning: Class 1 Laser
FindFiber
Instruction Sheet
®
*
™
Source
Pro optical
Advertisement
Table of Contents
Related Manuals for Fluke FindFiber Source
Summary of Contents for Fluke FindFiber Source
- Page 1 • Use of controls, adjustments, or procedures not stated herein might result in hazardous radiation exposure. PN 3314833 (English) September 2008 ©2008 Fluke Corporation. All rights reserved. Printed in USA. All product names are trademarks of their respective companies.
- Page 2 Never connect the source to an active network. Doing so can disrupt network operations. Battery Installation, Life, and Status IEC LR6 NEDA 15A Note: Fluke Networks recommends alkaline batteries. ffu02.eps • The batteries last for about 80 hours of typical use. •...
- Page 3 Turn on the meter and the FindFiber sources. To change the number transmitted by a FindFiber source, turn the source off, hold down the power key for about 4 seconds; then release the key when the desired LED turns on.
- Page 4 Registration Registering your product with Fluke Networks gives you access to valuable information on product updates, troubleshooting tips, and other support services. To register, fill out the online registration form on the Fluke Networks website at www.flukenetworks.com/registration. Contacting Fluke Networks www.flukenetworks.com...
- Page 5 Conforms to relevant Australian standards Conforms to relevant European Union directives Laser safety Complies with 21CFR.1040.10,11, and EN60825-1, 2:2007 (Class 1, Hazard Level 1) * Battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.
- Page 6 LIMITED WARRANTY AND LIMITATION OF LIABILITY Fluke Networks mainframe products will be free from defects in material and workmanship for one year from the date of purchase. Parts, accessories, product repairs and services are warranted for 90 days, unless otherwise stated. Ni-Cad, Ni-MH and Li-Ion batteries, cables or other peripherals are all considered parts or accessories.
Need help?
Do you have a question about the FindFiber Source and is the answer not in the manual?
Questions and answers