Table of Contents
Advertisement
Quick Links
The FT500 FiberInspector
magnification probe and display used to inspect fiber optic end-faces
on patch cord and bulkhead connectors.
The video microscope comes with the following:
•
FT500 probe and display
•
AC adapter/charger
•
Standard probe tip set (ST, SC, and universal 2.5 mm)
•
Hex key
•
Instruction sheet
•
Soft carrying case
If anything is missing or damaged, contact the place of purchase
immediately.
Safety Information
To avoid possible eye damage caused by hazardous
radiation, never look directly into optical output
connectors. Some sources produce invisible radiation that
can permanently damage your eyes.
To avoid possible fire, electric shock, personal injury, or
damage to the video microscope:
•
Do not open the case; no user-serviceable parts are
inside.
•
Use only the ac adapter/charger provided to power
the display and charge the battery.
PN 2822112 (English) February 2007 Rev. 2 2/08
©2007, 2008 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
FiberInspector
TM
Mini video microscope is a hand-held, 200x
W
Warning
FT500
T M
Mini Video
Microscope
Instruction Sheet
X
*
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fluke FiberInspector FT500
Summary of Contents for Fluke FiberInspector FT500
-
Page 1: Safety Information
Use only the ac adapter/charger provided to power the display and charge the battery. PN 2822112 (English) February 2007 Rev. 2 2/08 ©2007, 2008 Fluke Corporation. All rights reserved. Printed in USA. All product names are trademarks of their respective companies. -
Page 2: Charging The Battery
Charging the Battery Charge the battery for about 4 hours before using battery power for the first time. To charge the battery, connect the ac adapter/charger and set the switch on the display to OFF/CHARGE. The LED on the ac adapter/charger is red during charging and green when charging is complete. - Page 3 To ensure continuous operation, connect the ac adapter whenever possible. The LED lights when remaining battery life is about 30 minutes. Screw an adapter tip onto the fiber probe to match the connection you are inspecting. Use the universal tip for patch cords.
-
Page 4: Replacing The Battery
Getting Service Contact Fluke Networks for information on authorized Fluke Networks service centers. Accessories The following accessories are available from Fluke Networks for the FT500 FiberInspector Mini video microscope. Visit the Fluke Networks www.flukenetworks.com website at for a complete list of fiber test equipment and accessories. -
Page 5: Specifications
Contacting Fluke Networks www.flukenetworks.com support@flukenetworks.com +1-425-446-4519 • Australia: 61 (2) 8850-3333 or 61 (3) 9329-0244 • Beijing: 86 (10) 6512-3435 • Brazil: 11 3759 7600 • Canada: 1-800-363-5853 • Europe: +44-(0)1923-281-300 • Hong Kong: 852 2721-3228 • Japan: 03-3434-0510 •... - Page 6 (100 mm x 72 mm x 43 mm, with TPAK adapter) LIMITED WARRANTY AND LIMITATION OF LIABILITY Fluke Networks mainframe products will be free from defects in material and workmanship for one year from the date of purchase. Parts, accessories, product repairs and services are warranted for 90 days, unless otherwise stated.
Need help?
Do you have a question about the FiberInspector FT500 and is the answer not in the manual?
Questions and answers