Custom Settings - Brother MFC-5100C Owner's Manual

Custom Settings

Volume Settings
Ring Volume
You can select how loud, the machine rings for incoming calls. The ring volume can be turned off
for silent reception if required.
1
Press Menu/Set, 1, 4, 1.
2
Press or to select OFF, LOW or HIGH.
3
Press Menu/Set when the screen displays your selection.
4
Press Stop/Exit.
—OR—
You can adjust the ring volume when the machine is idle. You can turn the ring OFF.
Press or to adjust the volume level. With each key press, the machine rings so you can hear
the current setting and the display shows the setting you are choosing. Each key press changes the
volume to the next setting.
The new setting will remain until you change it again.
Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The machine comes set to LOW. When the beeper
is set to LOW or HIGH, the machine beeps every time you press a key or make an error, and at the
end of sending or receiving a fax.
1
Press Menu/Set, 1, 4, 2.
2
Press or to select your setting.
3
When the screen displays the setting you want, press Menu/Set.
4
Press Stop/Exit.
Turning Off the Scanner Lamp
The scanner lamp stays on for 16 hours before switching off to preserve the life of the lamp. You
can turn off the scanner lamp manually if you wish by pressing the
simultaneously. The scanner lamp will remain turned off until the next time you use the scanning
feature.
Turning off the scanner lamp will also reduce the power consumption.
Please note that turning the lamp off regularly will reduce the lamps life.
and keys
Setup
18