Using The Windows -Based Brother Mfl-Pro Control Centre; Brother Mfl-Pro Control Centre - Brother MFC-5100C Owner's Manual

14
Using the Windows

Brother MFL-Pro Control Centre

The Brother Control Centre is a software utility that pops up on the PC screen whenever paper is
placed in the automatic document feeder. This allows you to quite easily, with very few mouse
clicks, access the most frequently used scanning applications. Using the Control Centre eliminates
the need to manually launch the specific applications.
If you want to scan the document from glass platen, please use Scan to key on
the control panel (See Using the Colour Scan Key, page 80) or TWAIN driver (See
Scanning a Document, page 95)
The Brother Control Centre provides three categories of functions:
1. Scan directly to a file, E-mail, word processor or graphic application of choice
2. Copy operations
3. PC Faxing using the Brother MFL Pro PC Fax software
MFC-5100C
AutoLoad the Brother Control Centre
The Control Centre is initially configured to automatically load each time Windows
When the Control Centre is loaded, the Control Centre
don't want the Control Centre to load automatically, you can turn off AutoLoad.
If the Control Centre
launch this software. From the Start menu, select Programs, PaperPort, and
then double-click Brother SmartUI POPUP.
79
Chapter 14
-Based Brother MFL-Pro Control Centre
®
icon will appear in the task bar. If you
icon does not appear in your task bar, you will have to
®
is started.