Getting Started; Initial Setup; Setting The Date And Time; Setting Tone And Pulse Dialing Mode - Brother MFC-420CN User Manual

2

Getting started

Initial Setup

Setting the Date and Time

When the MFC is not in use it will display the date and time. If you
set up the Station ID the date and time displayed by your MFC will
be printed on every fax you send. If there is a power failure, you may
have to reset the date and time. No other settings will be affected.
1
Menu/Set
Press
2
Enter the last two digits of the year.
Menu/Set
Press
3
Enter two digits for the month.
Menu/Set
Press
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Menu/Set
Press
(For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Menu/Set
Press
(For example, enter 15:25 for 3:25 P.M.)
6
Stop/Exit
Press
The LCD now shows the date and time whenever the MFC is in
Fax mode.

Setting Tone and Pulse dialing mode

1
Menu/Set
Press
2
Press or
▲
Tone ).
Menu/Set
Press
3
Stop/Exit
Press
0 2
, , .
.
.
.
.
.
0 4
, , .
to select Pulse (or
▼
.
.
Initial Setup
2.Date/Time
Initial Setup
4.Tone/Pulse
GETTING STARTED 2 - 1