Turning Off Remote Fax Options; Setting Your Remote Access Code - Brother MFC-420CN User Manual

Turning off Remote Fax Options

If you set the Remote Fax Options to Off and there are faxes in your
MFC's memory, the LCD will give you two options.
■
If you press
before the setting turns off. If a backup copy has already been
printed it will not be printed again.
■
If you press
be unchanged.
(See Printing a fax from the memory (MFC-420CN only) on page
4-5.)

Setting your Remote Access Code

The remote access code lets you access the Remote Retrieval
features when you are away from your MFC. Before you use the
remote access and retrieval features, you have to set up your own
code. The default code is inactive code (---
1
Menu/Set
Press
2
Enter a three-digit code using
0
numbers
Menu/Set
Press
Do not use the same digits that appear in your Fax Receive
51
Code (
(See Operation from extension telephones on page A-7.)
3
Stop/Exit
Press
You can change your code at any time by entering a new one.
If you want to make your code inactive, press
2 to restore the inactive setting (---
6 - 4 REMOTE FAX OPTIONS (MFC-420CN ONLY)
1
, all unprinted faxes will be printed and erased
2
, the memory will not be erased and the setting will
2 5 2
, , , .
9
- or .
. (The preset '
) or Telephone Answer Code (
.
).
Remote Fax Opt
2.Remote Access
' cannot be changed.)
# 51
).
Stop/Exit
).
in Step