General Setup; Setting The Mode Timer; Setting The Paper Type - Brother MFC-420CN User Manual

General Setup

Setting the Mode Timer

The MFC has four temporary mode keys on the control panel:
PhotoCapture, Copy, Fax and Scan. You can change the number of
seconds or minutes the MFC takes after the last Copy, Scan or
PhotoCapture operation before it returns to Fax mode. If you select
Off , the MFC stays in the mode you used last.
1
Menu/Set
Press
2
Press or
▲
0 Sec , 30 Secs , 1 Min , 2 Mins ,
5 Mins or Off .
Menu/Set
Press
3
Stop/Exit
Press

Setting the Paper Type

To get the best print quality, set the MFC for the type of paper you
are using.
1
Menu/Set
Press
2
Press or
▲
Plain , Inkjet , Glossy or
Transparency .
Menu/Set
Press
3
Stop/Exit
Press
The MFC ejects paper with printed surfaces face up onto the
paper tray in the front of the machine. When you use
transparencies or glossy paper, remove each sheet immediately
to prevent smudging or paper jams.
1 1
, , .
to select
▼
.
.
1 2
, , .
to select
▼
.
.
General Setup
1.Mode Timer
General Setup
2.Paper Type
GETTING STARTED 2 - 3