Brother MFC-420CN User Manual page 122

ERROR MESSAGES
ERROR CAUSE
MESSAGE
The MFC is out of paper.
No Paper Fed
The paper is jammed in the MFC.
The number you dialed does not
No
answer or is busy.
Response/Busy
You tried to access a Speed Dial
Not
number that is not programmed.
Registered
You can't store data in the
Out of Memory
memory.
The paper is jammed in the MFC.
Paper Jam
Paper is not the correct size.
Wrong Paper
Size
11 - 3 TROUBLESHOOTING AND ROUTINE MAINTENANCE
ACTION
Add paper, and then press Black Start or
Color Start.
See Printer jam or paper jam on page 11-6.
Verify the number and try again.
Set up the Speed Dial number.
(See Storing Speed-Dial numbers on page
5-1.)
(Fax sending or copy operation in process)
Press Stop/Exit and wait until the other
operations in progress finish and then try again.
—OR—
(MFC-420CN only) Clear the data in the
memory. To gain extra memory, you can turn
off Fax Storage. (See Setting Fax Storage on
page 6-3.)
—OR—
(MFC-420CN only) Print the faxes that are in
the memory.
(See Printing a fax from the memory
(MFC-420CN only) on page 4-5.)
(Printing operation in process)
Reduce print resolution.
(See Printer jam or paper jam on page 11-6.)
Reload the correct size of paper (Letter, Legal
or A4), and then press Black Start or
Color Start.