Setup Receive; Basic Receiving Operations; Choosing The Receive Mode - Brother MFC-420CN User Manual

4

Setup Receive

Basic receiving operations

Choosing the Receive Mode

There are four different Receive Modes for your MFC. You can
choose the mode that best suits your needs.
LCD
Fax Only
(automatic receive)
Fax/Tel
(fax and telephone)
(with an external or
extension telephone)
External TAD
(with an external
answering device only)
Manual
(manual receive)
(with an external or
extension telephone or
with Distinctive Ring)
How it works
The MFC automatically
answers every call as a
fax.
The MFC controls the
line and automatically
answers every call. If the
call is a fax it will receive
the fax. If the call is not a
fax it will ring
(pseudo/double ring) for
you to pick up the call.
The external answering
device (TAD)
automatically answers
every call.
Voice messages are
stored on the external
TAD. Fax messages are
printed.
You control the phone
line and must answer
every call yourself.
When to use it
For dedicated fax lines.
Use this mode if you expect to receive lots of fax
messages and few telephone calls. You cannot
have an answering machine on the same line, even
if it is on a separate wall jack on the same line. You
cannot use the telephone company's Voice Mail in
this mode.
Use this mode if you have connected an answering
machine to your MFC.
The External TAD setting works only with an
external answering machine. Ring Delay does not
work in this setting.
Use this mode if you do not receive many fax
messages, with Distinctive Ring, or if you are using
a computer on the same line.
If you answer and hear fax tones, wait until the MFC
takes over the call, then hang up.(See Easy
Receive on page 4-4.)
SETUP RECEIVE 4 - 1