Unless you are using Distinctive Ring, do not connect a
TAD elsewhere on the same phone line.
(Example for the U.K.)
When the TAD is in use, the LCD shows Telephone .
Connections
The external TAD must be connected as shown above.
1
Set your external TAD to one or two rings. (The machine's Ring
Delay setting does not apply.)
2
Record the outgoing message on your external TAD.
3
Set the TAD to answer calls.
4
Set the Receive Mode to External TAD .
(See Choosing the Receive Mode on page 5-1.)
TAD
TAD
INTRODUCTION 1 - 9