ECM (Error Correction Mode)
The Error Correction Mode (ECM) is a way for the machine to check
a fax transmission while it is in progress. If the machine detects
errors during fax transmission, it resends the pages of the fax that
had an error. ECM transmissions are only possible between fax
machines that both have this feature. If they do, you may send and
receive fax messages that are continuously being checked by the
machine.
Your machine must have enough memory for this feature to work.
Connecting the machine
Connecting an external telephone
You can connect a separate telephone (or telephone answering
device) directly to your machine as shown in the diagram below.
(Example for the U.K.)
When this phone (or TAD) is in use, the LCD shows Telephone .
Extension
Telephone
External
Telephone
INTRODUCTION 1 - 7