Using Tx Lock; Setting Up The Tx Lock For The First Time - Brother MFC-3320CN User Manual

Brother industries, ltd. user's guide printer mfc-3320cn
Hide thumbs Also See for MFC-3320CN:
Table of Contents

Advertisement

Using TX Lock

You must use a password to switch TX Lock ON and OFF.

Setting Up the TX Lock for the First Time

1
Menu/Set
Press
2
Enter a 4-digit number as a new
password.
3
Menu/Set
Press
The screen prompts you to re-enter
the password.
4
Re-enter the password and press
5
Press
6
Menu/Set
Press
prompts you to enter the password.
7
Enter a 4-digit password, followed by
This is the same as the security password of the machine
already stored.
The screen displays Accepted for 2 seconds, followed by
TX Lock Mode - TX Lock is now switched ON.
If the password you enter at Step 7 is incorrect, the screen
would display Wrong Password . After 2 seconds the display
will then return to normal (displaying the date & time). You must
then switch ON TX Lock again. (See Switching TX Lock ON on
page 6-19.)
2
0
1
,
,
,
.
.
or
to choose Set TX Lock .
. The screen
1.TX Lock
New Passwd:XXXX
Verify:XXXX
Menu/Set
.
Password:XXXX
Menu/Set
.
SETUP SEND 6 - 18

Advertisement

Table of Contents
loading

Table of Contents