Extron electronics UCS FT 901 User Manual page 6

UCS FT 901 and FR 902 • User Guide (Continued)
ZipClip 100 and 200 Installation and Mounting
Both the UCS FT 901 and UCS FR 902, alongside their respective external power supplies (PS 1205 C and PS 1215 C), can be
mounted under a desk, onto a wall or other furniture using the ZipClip 200 and 100 (included). See ZipClip mounting options at
www.extron.com.
1. Mount the ZipClip 200 to an under-desk
mounting surface or to a rack rail using
the four included mounting screws (see
figure 8).
For the receiver power supply
(PS 1215 C), also mount the ZipClip
100, adjacent to the ZipClip 200.
2.
Mount the UCS transmitter or
receiver to the ZipCaddy 200.
If mounting the transmitter, also
mount its external power supply
(PS 1205 C) as follows:
Align the mounting holes on the
bottom of the UCS unit with the
mounting holes on the ZipCaddy
(see figure 9), and fasten the
screws.
NOTE:
The receiver power
supply (PS 1215 C) attaches
directly to the ZipClip 100
(see figure 10 on the next
page).
6
ZipClip 100 100
Figure 8. Under-desk Mounting (ZipClip 100 and ZipClip 200)
ZipCaddy 200
PS 1205 C
UCS FT 901
Figure 9. ZipCaddy Mounting (UCS FT 901 and UCS FR 902)
ZipClip 200
ZipCaddy 200
UCS FR 902