Disassembling And Assembling - Siemens Servo i Service Manual

Servo...
E382 E407E 061 01 01 02

4. Disassembling and assembling

General .............................................................. 4 - 2
Preparations ...................................................... 4 - 2
Handling PC boards ........................................... 4 - 2
Replacing PC boards ......................................... 4 - 2
Assembling guidelines ...................................... 4 - 2
User Interface .................................................... 4 - 3
Patient Unit ....................................................... 4 - 4
Only personnel trained and authorized by
Siemens shall be permitted to perform
installation, service or maintenance of the
Servo... System.
Make sure that the Servo... System is properly
cleaned before performing any service or
maintenance; routine cleaning as well as extended
cleaning. For cleaning procedures, refer to the
"Servo... Ventilator System – User's manual".
Any service or maintenance must be noted in a log
book.
All disposable parts must be discarded according
to local regulations and in an environmentally
acceptable way.
After any service or maintenance of the Servo...
System, perform a "Pre-use check". Refer to the
"Servo... Ventilator System – User's Manual" for
details.
Siemens-Elema AB
Disassembling and assembling
4 - 1
4