Siemens Servo i Service Manual page 11

Servo...
User Interface
The User Interface can be mounted onto the Mobile
cart but can also easily be removed from the cart and
mounted on the bed post or table/shelf. The User
Interface can be rotated and tilted into a suitable
position. Locking levers, mounting devices and some
other items are shown in the illustration above.
1. Loudspeaker
2. Cable reel
3. PC Card slot with slot cover
4. Locking arm, rotation
5. Locking screw, alternative mounting
6. Panel holder
7. Control cable
8. Connection for PC, service port
9. On/Off switch
10. Locking arm, tilting.
For further information regarding the User Interface
controls, refer to the User's manual.
E382 E407E 061 01 01 02
When the front panel section is removed from the
rear cover, the following parts are accessible:
• Touch screen assembly, front cover frame included.
• TFT Display including lamps.
• PC board Backlight inverter.
• PC 1777 Panel including PC Card slot.
• Loudspeaker.
• Main rotary dial (rotary encoder with switch).
• Direct access controls (rotary encoder).
Loudspeaker TFT Display
Main rotary Backlight
dial inverter
Siemens-Elema AB
Introduction
PC 1777 PC Card-
Panel slot
Direct access Touch screen
controls assembly
2
2 - 3