Confirming Settings - Brother HL-4200CN User Manual

Continued from the previous step.
Protocol
LPD
Protocol
Port9100
Protocol
IPP
Protocol
NetBIOS TCP/IP
Protocol
NetBEUI
Protocol
NetWare
Protocol
AppleTalk

Confirming Settings

Print the printer settings list to check the content of printer settings.
The printer settings list also contains information that is required when configuring computers for printing.
Use the list to confirm that settings on the printer and the computer match.
For details about printing the Panel Settings List, see Confirming Printer Configuration and Network
Settings on page 7-19.
1 - 9 PRINTER SYSTEM SETTINGS
Starting protocols
6
Press the button once.
7
Press the button once.
8
Press the button once.
9
Press the button once.
10
Press the button once.
11
Press the button once.
1. Press the Form Feed/Set button
once. XXX indicates the protocol
name.
XXX
Disabled *
2. Press the button once.
XXX
Enabled
3. Press the Form Feed/Set button
once. Reboot system to take
effect appears for 3 seconds,
and then the following screen will
appear.
XXX
Enabled *
4. To start other protocols, press
the Job Cancel/Back or
button once, and then continue
to the next step.
To finish the setup, go to step 12.
12
Restart the printer.