Setting The Ip Address - Brother HL-4200CN User Manual

Continued from the previous page.
Setup IP Address
Panel *
Wait to restart the printer until after you set the gateway address at the last step. Continue to the next
step without restarting the printer.

Setting the IP Address

The IP address consists of four separate values (base 10) separated by decimal points. Each of the
four values can be set to a number between 0 and 255.
Continued from the previous step
TCP/IP
Setup IP Address
TCP/IP
IP Address
IP Address
000.000.000.000*
IP Address
192.000.000.000
IP Address
192.000.000.000
IP Address
192.168.001.100
Continued
1 - 5 PRINTER SYSTEM SETTINGS
When the new value is set, an * appears next to it.
9
Press the Job Cancel/Back or
The lower line of the screen returns to Setup IP Address.
10
Press the button once.
11
Press the Form Feed/Set or
12
Press the or
example, 192). You can hold down the buttons to change the value
in increments of 10.
13
Press the button once to move the cursor to the next value.
14
Repeat steps 12 and 13 to finish setting the IP address.
15
Press the Form Feed/Set button once.
button once.
Example:
IP Address 192.168.1.100
button once.
button until the value you want appears (for