List Of Menu Items; System Settings; Power Save Time; Error Alarm - Brother HL-4200CN User Manual

List of Menu Items

This section describes the various settings you can change in each main menu.
When printing, it is possible to set some options in the menu screens from your computer. If the computer
settings differ from those on the printer, the computer settings take precedence.
'Default' refers to the factory settings of the printer.

System Settings

Used to program the Energy Save Mode, Job Log settings, and basic printer operation.

Power Save Time

Energy Save Mode reduces the electricity used by the printer when it is idle. Mode 1 partially reduces
the power used by certain parts of the printer.
When the printer is in Energy Save Mode 1, Ready/Standby appears on the display. When in this state,
the printer takes slightly more time than usual to start printing when it receives data.
The table below describes the situations in which the printer will stop being in Energy Save Mode:
Release from Energy Save
• When receiving print data.
• When printing a report or list with '4 Report/List'.
Mode 1 time-out (default: 3 minutes)
Set a time between 1 and 60 minutes. The printer automatically goes into Energy Save Mode 1
when it is idle for the length of time you set here.

Error Alarm

This allows you control whether the printer sounds or does not sound an audible alarm when an error
occurs.
Yes (default)
No
The volume of the alarm can not be adjusted.
Mode 1
CONTROL PANEL 4 - 6