Setting The Subnet Mask - Brother HL-4200CN User Manual
Color laser printer
Hide thumbs
Also See for HL-4200CN:
- Service manual (366 pages) ,
- Network user's manual (63 pages) ,
- Quick setup manual (41 pages)
Table of Contents
Advertisement
Continued from the previous step.
Reboot system
to take effect
IP Address
192.168.001.100*
Setting the Subnet Mask
Continued from the previous step
TCP/IP
IP Address
TCP/IP
Subnet Mask
Subnet Mask
000.000.000.000*
Subnet Mask
255.255.255.000*
3 seconds later, the following screen will appear.
16
Press the Job Cancel/Back or
The lower line of the screen returns to IP address.
17
Press the
button once.
18
Press the Form Feed/Set or
19
Set the subnet mask in the same way as the IP address. To set
values with the
change the value sequentially.
20
Press the Job Cancel/Back or
The lower line of the screen returns to Subnet Mask.
button once.
button once.
or
button, you can hold down the button to
button once.
PRINTER SYSTEM SETTINGS 1 - 6
Advertisement
Table of Contents
