Searching Traces; Go To Trigger - LeCroy USB Mobile HS User Manual

USBMobileHS User Manual
Chapter 6: Searching Traces
The Search feature provides methods for searching recorded traffic to find specific
packets based on triggering status, packet number, marking, or content.
To view the Search options:

6.1 Go to Trigger

Note:
To display a Trigger Event:
The Trace View is repositioned to the first packet following the Trigger event. This packet
is at the top of the screen.
LeCroy Corporation
• Click Search in the Menu bar ti display the Search drop-down menu:
Go to Trigger is enabled only when a trigger has created a traffic file.
• Select Go to Trigger under Search on the Menu Bar.
Chapter 6: Searching Traces
53