☛ ☛ ☛ ☛ 10.
Attach the printer board cover that was removed in step 3, and use the
screwdriver to fasten the six screws.
☛ ☛ ☛ ☛ 11.
Reconnect the interface cable to the printer. Plug the power cord into the AC
outlet, and then turn on the printer.
☛ ☛ ☛ ☛ 12.
Format the HD-6G/HD-EX from the Control panel.
Fig. 4-108
4-64
See Chapter 3 for details.